UTS EVO Magnetic Drive Pump

The UTS EVO magnetic drive, or ‘mag drive’, pump is both highly efficient and extremely durable.

Available as either a long-coupled (UTS EVO) or close-coupled (UTS-B EVO) option, this centrifugal pump features a zero-vapour loss and corrosion-resistant design for heavy-duty chemical and pharmaceutical applications.

Suitable for both high temperature and low temperature applications from -100° up to +180° as standard – expandable up to +300° with the right choice of options.

The UTS Evo as viewed from the rear when uncoupled

2021 saw the upgrade of the traditional UTS magnetically driven pump and the EVO was launched.


The UTS EVO features:

  • Improved pump hydraulics resulting in more efficient operation and reduced running costs
  • Re-designed magnetic coupling to not only be smaller, but to be stronger too
  • An expanded range of materials available for the isolation shell – including the option of non-metallic zirconium oxide reducing the eddy current
  • Improved ability to overhaul your pumps by introducing a single cartridge assembly to fit a group of pumps (speak to us for more information about which ones)
  • The ability to include secondary containment and leak detection for arduous and toxic applications

Suitable for handling aggressive, toxic and hazardous liquids, the UTS Evo seal-less pump is the right choice for the chemical, petrochemical and pharmaceutical industries; these mag drive pumps are manufactured in stainless steel and on a bare shaft execution and are equipped with a reliable oil-lubricated bearing bracket which has been developed to suit the most arduous of duties.

This magnetic drive pump is available as the long-coupled UTS EVO or the close-coupled UTS-B EVO in popular Stainless Steel AISI 316, but also Hastelloy for increased corrosion resistance or Super Duplex for increased abrasion resistance.

Capable of handling hot fluids, optional steam jackets also keep your liquids warm whilst passing through the pump reducing any viscosity concerns you may have.

CDR Pumps work with you to provide a safe and reliable pumping solution to ensure your plant operates to its full capacity, however with rotating equipment, mechanical failures can occur. The UTS EVO and UTS-B EVO magnetic drive pumps have the unique addition of a heavy-duty bearing assembly system which includes the bearing support and rotating bearings, bushes and wet-end gaskets. This assembly system is available as an optional extra and by keeping one on the shelf, you have an instant back up system on site which can have you back up and running in a couple of hours.

Pump Overview

Shaft Seal Type: Magnetic drive
Design: EN 22858 – ISO 2858
Standard: ISO 5199
Casing & Impeller Materials: AISI 316 (1.4408)
Impeller Type: Closed
Execution: UTS: Long-coupled | UTS-B: Close-coupled
Flanges: UNI 1092-2 (ISO 7005-2) PN16RF drilling slotted ANSI150RF
Max rated pressure @ 20°C: PN 16
Max Fluid Temperature: -100°C / +300°C
Max Flow Rate @ 2900 rpm: 300 m3/h
Max Head @ 2900 rpm: 100 m
Allowable medium viscosity range: 1 cSt – 60 cSt
ATEX Certification: Available on request

UTN Performance Fields

50 Hz 2900 rpm

UTS Performance 50 Hz 2900 rpm

60 Hz 3500 rpm

UTS Performance 60 Hz 3500 rpm

UTN Performance Fields

50 Hz 1450 rpm

UTS Performance 60 Hz 1450 rpm

60 Hz 1750 rpm

UTS Performance 60 Hz 1750 rpm

Pump Cartridge Assembly

Polymer Concrete Baseplate

PT100 Thermocouple

Dry Run Protection