Standard magnetic drive pumps are generally unable to process liquids containing solids since they block and damage the fluid paths, leading to pump failure.
Our solids handling mag drive has been engineered with a unique open impeller and large flushing channels within the pump, which allows the smooth flow of solids-laden fluids without blockage.
Building on the benefits of the traditional mag drive, its seal-less design removes the risk of fluid contamination and leakage, ensuring the safe transfer of corrosive, toxic or hazardous liquids. Pumps can be ATEX-certified on request.
With no complex sealing or external flushing systems, installation costs and maintenance requirements are reduced.
A metallic version of this pump manufactured in stainless steel AISI 316 is also available.
| Shaft Seal Type: | Magnetic Drive |
| Design: | EN 22858; ISO 2858; EN 15783 |
| Casing/Impeller Material: | PFA Lined |
| Bushings/Shaft Material: | Diamond Compound |
| Body Type: | Radially Split Volute Casing |
| Impeller Type: | Open |
| Aspiration Position | End suction |
| Execution Type: | Horizontal – Close-Coupled |
| Pull-out Design: | Yes |
| Connection Types: | Flange |
| Flange: | UNI 1092-2 (ISO 7005-2) PN16RF slotted to ANSI 150 |
| Suction Characteristics: | Non-priming |
| Maximum Pressure Range @20°C: | PN 16 |
| Fluid Temperature Range: | –50°C to +160°C |
| Maximum Total Head@ 2900 RPM: | 60 m |
| Maximum Flow @ 2900 RPM: | 70 m3/h |
| Viscosity Range: | 0.5 cSt – 180 cSt |
| Maximum Installable Power: | 18.5 kW |